INSTRUCTIONS CABRI-30P/35P
Page16
SWING GATE OPENER
2.3.5 Electric Latch and Stopper
1.
Stopper
:
1). Before installing the stopper, please make sure the gates are in close positions and
the surface to be installed is flat.
2). Place the stopper on the ground using the bottom as reference, and mark the 3
drilling points.
See
Figure 2.3.5 (1)
for the gate opened inward.
See
Figure 2.3.5 (2)
for the gate opened outward.
Figure 2.3.5(1) Figure 2.3.5(2)
3
). Drill the 3 marked points, and then securely attach the stopper to the ground with
screws and washers.See
Figure 2.3.5 (3)
Figure 2.3.5(3)
2. Electric Latch. (If the gate is opened outward)
1)
If the gate is opened outward, please change the spring inside and screw it in the
different place. See
Figure 2.3.5(4), Figure2.3.5(5), Figure2.3.5(6), Figure2.3.5(7)
