Autodesk CP100, User Manual

Page: 68 / 80

The Tangent CP100 Control Surface 2
62
To modify gamma, gain, and lift:
1. Enable Grade and then do one of the following:
•
Enable InPr to modify the input primary values.
•
Enable OutPr to modify the input primary values.
2. Use the following controls to perform primary colour grading.
=====
Grade|PanScn|Curves|HueCrv|Keyer|Geom
=====
InPr |Sec1 | OutPr | Reset |Inside|Outside
F1 F2 F3
F4 F5 F6
F7 F8 F9
Red Gain | Green Gain | Blue Gain
Primary
Red Lift | Green Lift | Blue Lift
Primary
Red Gamma | Green Gamma | Blue Gamma
Primary
Primary
Lift
Primary
Gamma
Primary
Gain
Primary
overall
gamma overall
gain gain
balance gamma
balance lift
balance
overall
lift