Autodesk CP100, User Manual

Page: 25 / 80

Saving the Current Grade
19
To load a grade from the Grade bin:
1.
On the Storyboard, navigate to the shot to which you want to load one or more grades.
H
INT
:
This step can also be performed after you enter Grade Load-Recall mode.
2.
Press the Recall button on the Navigation panel.
This activates Grade Load-Recall mode.
3. To select a grade in the Grade bin, do one of the following:
•
Use the jog ball on the trackball to navigate the Grade bin.
•
Press the keypad number button corresponding to the desired Grade bin container
position once to jump to it.
4. To load the grade to the current selected shot on the Storyboard, double-press the
appropriate number button twice.
After the grade is loaded to the shot, you are still in Grade Load-Recall mode and can load
other grades from the Grade bin to the shot. Use the trackball ring to navigate to other shots.
5. To exit Grade Load-Recall mode, press Recall.
Saving the Current Grade
You can use the Navigation panel to save the current grade file and cut.
N
OTE
:
If a grade file has not been created, a default grade file is saved.
To save the current grade file and cut:
h
Press ALT and DO on the Navigation panel.
Adjusting Printer Lights
You can adjust printer lights on the Navigation panel. Printer light values are displayed in the
Colour Grading panel’s digital display.
N
OTE
:
You can also adjust printer lights on the Function panel when the Grade menu is enabled.
See “Grading in Logarithmic Mode Using the Function Panel” on page 30.