Autodesk 15606-011408-9320 - MAP R6.3 CPU MODEL-UPG 4/5 MIN 2 CPUS INITL, User Manual

Page: 127 / 190

Moving Around on a Map
|
127
Autodesk MapGuide Author downloads additional layer data from the server
when the zoom and pan commands display new areas or layers of the map.
You can click Stop or press Esc to interrupt a data download.
Pan Moves the map to display areas that are outside the cur-
rent view. Drag the hand cursor to move a different area
of the map into view.
Zoom Zoom Increases magnification by a factor of two or zooms in to
a specific area of the map. To magnify by a factor of two,
click a point on the map to indicate the center of the
magnified area. To zoom to a specific area, drag a rect-
angle around the area, and then release the mouse but-
ton to zoom to the enclosed area.
Zoom Goto Zooms to a specified location. Select a category, enter
the name of a location, and then specify the width of the
area you want to view. Autodesk MapGuide Author
zooms to the specified width using the specified location
as the center of the map.
Zoom Width Zooms to a specified width on the center of the current
view.
Zoom Scale Zooms in or out to a specified scale, retaining the cur-
rent center of the map.
Zoom Selected Zooms to an area just large enough to enclose the
selected map features.
Zoom Previous Redraws the map at the previous zoom level and
location.
Zoom Out Zooms out by a magnification factor of two. Click a
point on the map to zoom out and recenter the map on
the point you clicked.
Zoom Unzoom Redraws the map so that Autodesk MapGuide Author
displays the entire map.