the refrigerator on and off.The LED
alongside the main switch will turn
green.The display LEDs show the
most recent settings. After 10
seconds the display LEDs will go
out.The LED of the main switch
remains green.
B Press the mode selector switch
and display the display LEDs will
show the setting for 10 seconds.
Successively pressing the model
selector switch takes you through
the menu in the following sequence:
AUTO, manual DC (12V), manual
mains voltage (230V), manual gas
and back to AUTO. Select either the
AUTO option or one of the other
power supplies that you want to
use.The LEDs show the option you
have selected. If you select the
AUTO option, the system will
choose the most suitable power
supply and the AUTO LED and the
LED of the power supply chosen by
the system will both light up.Ten
seconds after release of the mode
selector switch, the system will
switch off the LEDs.They will go
out.
C Use the temperature selection
switch to control the temperature
of the refrigerator.When you press
the temperature selector switch, the
LED showing the currently set
temperature will light up. Every time
you press temperature selector you
switch you set the refrigerator one
position cooler. On reaching the
coldest temperature, the system will
start again at the warmest
temperature setting.Ten seconds
after release of the temperature
selector switch, the system will
switch off the LEDs.They will go
out.
P
OWERING WITH
E
LECTRICITY
Auto Mode
Mains voltage (230V)
This energy source will be selected
if the mains voltage is greater than
200V.
This power supply requires a
continuous current of 12V to
operate the
electronic control system.
12V direct current
The SES system will select 12V
powering only if a mains voltage
(230V) is unavailable, the vehicle
engine is running and a voltage
higher than 11V is available.
If a fault occurs during electrical
powering (230V or 12V), an error
message will not be shown on the
display as long as another energy
source is available.The system will
automatically switch to the available
energy source that has the highest
priority.
Manual Mode
Mains voltage (230V)
If you select mains power (230 V)
manually, the refrigerator will
operate according to the
thermostatic setting.
7. GAS: APPLIANCES
