Auto-Sleepers warwick duo 2008, User Manual

Page: 25 / 106

7-5
CONNECTION OF SERVICES
Safety Note
• When pulling up to the Autogas
dispenser ensure the vehicle is parked
with the filling connector located nearest
to the dispensing pump.
• Apply the handbrake and switch off the
engine.
• No smoking, naked flames or mobile
phones are allowed on the Service
Station forecourt.
• The use of an adaptor is not
recommended.
• Refilling of portable LPG cylinders is not
allowed.
• All dispensing nozzles should be fitted
with a nozzle shield. Please report to
staff if missing.
Filling Nozzles
When connecting the nozzle to the filler valve
on your vehicle always check that the locking
pins are aligned.
There are two main types of filling nozzles
used in the UK - ‘Gas Guard’ and ‘De Visser’.
Gas Guard uses a rotating barrel to lock on
to the filler valve wherease De Visser uses a
lever.
1 - Gas Guard nozzle filling instructions
Ensure Gas Guard nozzles are fitted with protective nozzle shields. Report to site staff if missing.
(Nozzle shields have been removed from picture for clarity).
Connecting
(1) Push nozzle over
the lugs on the filler
valve and turn barrel a
quarter turn clockwise
to lock. Do not
squeeze lever before
nozzle is connected.
Caution: From this
moment onwards
ensure hands are
away from the nozzle
barrel.
(2) Pull back lever
and latch into place.
Ensure lever is
latched securely.
Follow instructions on
dispenser to
commence
dispensing.
Disconnect
(3) Ensure hands are
away from the nozzle
barrel.
Caution: When
dispensing has
ended, squeeze back
lever and release
latch. Release lever
fully. A small release
of gas will occur as
you release the lever.
This is normal! Do not
place hands on barrel
until after the gas has
been released.
(4) Turn barrel anti
clockwise a quarter
turn to release nozzle
from vehicle. Replace
nozzle in holder on
dispenser.
4 3
2 1