7-4
CONNECTION OF SERVICES
GAS SAFETY ADVICE
Facts about LPG
•
LPG is not poisonous.
•
LPG has been given a smell by manufacturers in order to identify leaks.
•
Bi-products of combustion are harmless.
•
There is danger if all air and oxygen are excluded, therefore ventilation holes must be kept
clear at all times.
PRECAUTIONS
a) Never look for a leak with a match. Always use a soap solution or its equivalent when testing
connections. Do not operate any electrical apparatus whatsoever, especially light switches. If
the leak is not obvious, the vehicle should be evacuated and qualified personnel consulted.
b) Avoid naked lights when re-fuelling.
c) LPG is more dense than air. Consequently any vapour may flow along the ground and into
drains, sinking to the lowest level of the surroundings and be ignited at a considerable
distance from the source of leakage. In still air the vapour will disperse slowly.
MAINTENANCE
The bulk tank installation requires no attention other than a check at the annual habitation
service, however, it should be noted that the bulk tank itself must be pressure tested by an
approved test house every 10 years.
1 - De Visser nozzle filling instructions
Ensure De Visser nozzles are fitted with protective nozzle shields. Report to site staff if missing.
(Nozzle shields have been removed from picture for clarity).
Connecting
(1)
Hold the hose
behind the nozzle and
the guard, keeping
lever pushed forward
with the handle at 12
o’clock position.
Locate the nozzle
over the lugs on the
filler valve and turn
the lever a quarter
turn clockwise to lock.
Caution:
From this
moment onwards
ensure hands are
away from the nozzle
barrel.
(2)
Pull back lever
towards hose and
latch into place.
Ensure lever is
latched securely.
Follow instructions on
dispenser to
commence
dispensing.
Disconnect
(3)
Ensure hands are
away from the nozzle
barrel.
Hold hose behind
guard and release
lever by pushing
forward. A small
release of gas will
occur as you release
the lever. This is
normal!
(4)
Turn lever anti
clockwise a quarter
turn to release nozzle
from vehicle. Replace
nozzle in holder on
dispenser.
4
3
2
1
Summary of Contents for Peugeot Kemerton
