Auto-Sleeper lancashire ek, Owner'S Manual

Page: 68 / 144

7-44
CONNECTION OF SERVICES
Event Timer = Off
12:00 till 12:00
Display Description Options / Notes
Access to set the event timer Please note the event timer uses a
Press the select button ( ) to select 24 hour cycle
HOUR ON The event timer is used to switch
Use the up/down ( ) buttons to the control panel power on and off
change in the absence of the user/
Press the select button ( ) to select occupier.
MINUTE ON See section 3.12 for further details
Use the up/down ( ) buttons to
change
Press the select button (
) to select
HOUR OFF
Use the up/down ( ) buttons to
change
Press the select button (
) to select
MINUTE OFF
Use the up/down ( ) buttons to
change
Press the select button (
) to exit
Shows the event timer status (OFF/ON) The addition of a hash (#) in the top
and the current On and Off times right of the main EC300 display
Press the select button ( ) to switch indicates that the event timer is set
This WARNING display indicates that the You can switch over to the
Vehicle battery voltage is low (10.9 volts or Leisure battery immediately
less). The panel will beep for one minute and (and cancel the beep) by using
then switch over to the Leisure Battery to the battery selector switch
prevent draining the Vehicle battery.
This WARNING display indicates that the See section 3.11 for further
Leisure battery voltage is low (6 volts or less). details
The panel will beep for one minute and then
switch the power off to prevent damage to the
leisure battery.
This WARNING display indicates that the EMC (Electro Magnetic Compatability)
system has been disabled because the vehicle directive 89/336/EEC requires that
engine is running electrical accessories within the
vehicle are disconnected while
the vehicle is in motion
Set Event Timer?
5 EC300 Control Panel (continued)
Vehicle Battery
Dangerously Low
Leisure Battery
Dangerously Low
System disabled
Engine started