6
15
AUTO METER
SB-300
TESTER/ANALYZER
‘Y’ FOR MENU
Battery Tester
SB-
CONTROLS AND FUNCTIONS
LCD:
Displays menus and test results.
KEYS:
When each key is pressed, a beep
sounds to assure contact has been
made.
On/Off
Key:
This is the manual on/off key.
Y Enter
Key:
This key selects the next menu, the
cursor line item and answers ‘
yes’
to
a test progression.
+Up
Key
:
This key moves the cursor up in
order to select a menu line item and
increments certain displayed values.
-Down
Arrow Key:
This key moves the cursor down
in order to select a menu line and
decrements certain displayed
values.
N Esc
Key:
This key cancels a test or progression. It also returns to the previous
menu.
Key
:
Point the SB-300 infrared print light towards the
Optional PR-12
infrared
printer receiver and press the print key. Test results will be printed.
Infrared Print Light:
When the print button is pressed
infrared data will be transmitted
to the printer when pointed in the
direction of the printer (up to 15 ft.).
PC Download Jack:
Adapter cord AC-12 can be
inserted here.
SETUP (cont.)
Select the rating from
CCA, MCA, CA, AH, EN.
SET DEFAULT
RATING: CCA
USE +/-
'Y' TO SELECT
>SET DEFAULT CCA
AS: 600
USE +/-
'Y' TO SELECT
DO YOU WANT TO
DISPLAY MEASURED
BATTERY CAPACITY
'N' OR 'Y'
You can also select the default rating to be
the last entered CCA value or a particular
amount such as 600 CCA.
If 'Y' is chosen, the measured battery
capacity will be displayed on the battery
test result screen and print out. If 'N' is
chosen no measured battery capacity will
be displayed or printed.
USE TEST RESULT
NEAR END OF LIFE
USE +/-
'Y' TO SELECT
PRINTOUT OPTION
AC-14/PR-12
USE +/-
'Y' TO SELECT
DO YOU WANT TO
ENTER STORE INFO
'N' OR 'Y'
To toggle battery test results between
"GOOD" or "BAD" only and "NEAR END
OF LIFE", use the (+Up) and (-Down) keys
to change setting then use 'Y' to select.
To print to an Auto Meter stand alone IR
printer choose "AC-14/PR-12". To print to
the Auto Meter high speed PR-16 printer
using the Auto Meter XTC-160 charger/
tester and IR-1 printer interface choose
"XTC-160/PR-16. To print to a network
printer using the POSI-160 choose POSI-
160".
Press 'Y' to enter or change the store
address for use on print outs or 'N' to
continue.
Entry Hints
To change the text or number press the (+)
or (-) keys. If you press 'N' at the beginning
of the screen, no changes will be made. To
make changes, use the (+) and (-) keys then
press 'Y' to save the change. The cursor will
then go to the next character or number. If
you are done making changes but there is
more text keep pressing 'Y' until the cursor
is on a blank space at the end of the lines
of text. Pressing 'N' moves back the cursor
position back one character. Pressing Print
saves the text up to the cursor position. Any
text after is deleted.
Note:
Address one & two and city have a max of 23 characters.
