4
17
SAFETY
Carefully read all operating instructions before
using the SB-300
Wear proper protection when working around
batteries.
Be sure each test is complete before removing
load clamps to prevent arcing and potential
explosion from battery gases. Keep sparks
flames, or cigarettes away from batteries.
Keep hair, hands, and clothing as well as tester
leads and cords away from moving blades and
belts.
Provide adequate ventilation to remove car exhaust.
In extremely cold temperatures, check for frozen
electrolytic fluid before applying load. Do not attempt
to Load Test or charge a battery under 20 degrees. Allow the battery to warm to room
temperature before testing or charging.
Warning!
Never attach the SB-300 to a battery that is connected to any other tester
or charging unit. Damage may result.
CAUSE OF BATTERY FAILURE
Incorrect Application:
Wrong size battery may have inadequate cold cranking Amp
rating for original vehicle specifications.
Incorrect Installation:
Loose battery hold-downs cause excessive vibration, which
can result in damage to the battery plates.
Improper Maintenance:
Low electrolytic fluid and corrosion on battery connections
can greatly reduce battery life and affect battery performance.
Age of Battery:
If the date code on the battery indicates it is old, the failure may be
caused by natural causes.
Overcharging:
Overcharging caused by a high voltage regulator setting or incorrect
battery charging can cause excessive gassing, heat and water loss.
Undercharging:
Undercharging caused by a faulty charging system or low voltage
regulation can cause lead sulfate to gradually build up and crystallize on the plates
greatly reducing the battery’s capacity and ability to be charged.
LIMITED WARRANTY
12 MONTHS FROM DATE OF PURCHASE-
CABLES 90 DAYS
The manufacturer warrants to the consumer that this product will be
free from defects in material or workmanship for a period of twelve
(12) months from the date of original purchase.
Products that fail within this 12 month warranty period will be repaired
or replaced at the manufacturer's option to the consumer, when
determined by the manufacturer that the product failed due to defects
in material or workmanship. This warranty is limited to the repair or
replacement of parts and the necessary labor by the manufacturer to
effect the repair or replacement of the product. In no event shall the
manufacturer be responsible for special, incidental or consequential
damages or costs incurred due to the failure of this product.
Improper use, accident, water damage, abuse, unauthorized repairs
or alterations voids this warranty. The manufacturer disclaims any
liability or consequential damages due to breach of any written or
implied warranty on its test equipment.
WARRANTY AND SERVICE INFORMATION
Warranty claims to the manufacturer's service department must be
transportation prepaid and accompanied by a dated proof of purchase.
This warranty applies only to the original purchaser and is non-
transferable. Freight damage incurred during return shipments is not
covered under this warranty. It is the responsibility of the shipper (the
customer returning the Test Equipment) to package the tester properly
to prevent any damage during return shipment. Repair costs for such
damages will be charged back to shipper (customer returning the Test
Equipment). Protect the product by shipping in original carton or add
plenty of over-pack cushioning such as crumpled up newspaper.
