53
Figure 5-22
Sample Turbo Service Screen 4
6.
The status will display “Actuator calibration is successfully completed”. Tap
ESC
to
exit.
Injector Service
The barcode printed on each injector must be programmed into the engine DCU every
time one or more injectors are replaced. Or when the DCU has been replaced, the new
DCU must always be reprogrammed with the codes for all the injectors. If the barcode
programmed in the engine DCU is incorrect for the injector, the engine may stall and run
very badly at idle. The engine may also break down and have a reduced service life.
This function serves to monitor and change injector barcode in the ECM as necessary.
Figure 5-23
Sample Turbo Service Screen 5
