76
Figure 7-2 Sample Select Test Type Screen
Wired Network
This option is available when a network cable is connected to the tablet via a
USB converter. It allows you to enable or disable the wired network
connectivity, as well as to perform Ethernet configuration.
To operate Ethernet configuration
1. Tap Settings on the MaxiSys Job Menu.
2. Tap Wired Network on the left column.
3. Tap ON/OFF to enable the Wired Network connection. If the connectivity
is enabled the button turns blue, or if disabled the button turns gray.
4. Tap the
button to the right of the Ethernet Configuration option, a setup
window displays.
5. Select a connection type:
DHCP
– obtains the LAN IP address automatically.
Static IP
– allows manual input of IP address.
If Static IP is selected, you need to enter the IP values manually.
NOTE
If you are not sure about the specific IP address values, please contact your
network administrator.
Tap Save to save the Ethernet configuration setting; or tap Cancel to exit
without saving.
Tap the Home button on the top left corner to return to the MaxiSys Job Menu.
Or select another setting option for the system setup.
