Autel MaxiSys ADAS Manual Download

Page: 118 / 136

111

Function Viewer

The Function Viewer allows you to search the functions supported by our tools
and the version information. There are two ways of searching, either by
searching the tool and the vehicle or searching the functions.



To search by the vehicle

1. Tap the Function Viewer application on the MaxiSys Job Menu. The

Function Viewer application screen displays.

2. Tap the tool name on the top left to drop down the tool list, tap the one

you want to search.

3. Tap the vehicle brand, model, and year you want to search.

Figure 15-1

Sample Function Viewer Screen 1

4. All the functions support by the selected tool for the selected vehicle

displays within three columns, function, sub function, and version.

Summary of Contents for MaxiSys ADAS









































































































































Search results

Summary of Contents for MaxiSys ADAS

Reviews:

Related manuals for MaxiSys ADAS

Brands by name

Popular brands

Autel MaxiSys ADAS, Manual

Search results

Summary of Contents for MaxiSys ADAS

Reviews:

Related manuals for MaxiSys ADAS

Brands by name

Popular brands