Autel MaxiSys ADAS Manual Download

Page: 81 / 136



To adjust the language setting

1. Tap the

Settings

application on the MaxiSys Job Menu.

2. Tap the

Language

option on the left column.

3. Select the required language. A check mark will display to the right of the

selected language.

4. Tap the

Home

button on the top left corner to return to the MaxiSys Job

Menu. Or select another setting option for the system setup.

Print

Printing Setting

This option allows you to print any data or information anywhere and anytime

either via PC network or Wi-Fi.



To setup the printer connection

1.  Tap Settings on the MaxiSys Job Menu.
2.  Tap Printing Setting on the left column.
3.  Tap the Print via Network item to activate the printing function, which

enables the device to send files to the printer through the Windows-
based PC via Wi-Fi or Ethernet connection.

4. Tap Home on the top left corner to return to the MaxiSys Job Menu. Or

select another setting option for the system setup.

Printing Operations



To install the MaxiSys Printer driver program

1. Download Maxi PC Suite from www.autel.com > Supports & Updates >

Firmware & Downloads > Update Client, and install to a Windows-
based PC.

2. Double click on

Setup.exe

item.

3. Select the installation language and the wizard will load.
4. Follow the instructions on the screen and click

Next

to continue.

5. Click

Install

and the printer driver program will be installed onto the

computer.

6. Click

Finish

to complete the installation.

NOTE

The MaxiSys Printer runs automatically after the installation.

Summary of Contents for MaxiSys ADAS









































































































































Search results

Summary of Contents for MaxiSys ADAS

Reviews:

Related manuals for MaxiSys ADAS

Brands by name

Popular brands

Autel MaxiSys ADAS, Manual

Search results

Summary of Contents for MaxiSys ADAS

Reviews:

Related manuals for MaxiSys ADAS

Brands by name

Popular brands