89
Figure 11-6
The battery charge status histogram will be reset when programming the
DME/DDE or registering a battery replacement.
Register Battery Replacement
This option allows displaying the mileage reading of last battery replacement,
registering the battery replacement after replacing a new battery and
informing the power management system that a new battery has been fitted
to the vehicle.
If the battery change is not registered, the power management system will
not function properly, which may not provide the battery with enough
charging power to operate the car and limit the functions of individual
electrical consumers.
To display the battery history:
1) Select
Register battery replacement
in the
Battery
menu and press
the
OK
button.
2) Press the corresponding
FUNCTION
button
[1]
and a notice displays.
Figure 11-7
3) Read carefully the complete information with the
UP/DOWN
scroll
button and press the
OK
button to continue.
Charge status histogram
Charge status histogram
Time with charge status in value
range:
0-20%: 0h
20-40%: 0h
40-60%:0h
60-80%: 247 h
80-100%: 41 h
OK
Register battery replacement
Selection
[1] Display kilometer reading of
last battery change and last but
one
[2] Register battery replacement
[3] End service function
[3] [2] [1]
