77
Figure 10-20
4) A series of instruction screens appears for users to perform the particle
filter regeneration step by step. Follow the instructions and press the
OK
. Do this until the tool reads off the regeneration status as below.
Figure 10-21
Figure 10-22
5) When the particle filter regeneration is complete, the tool will ask your
confirmation to exit the display. Select
Repeat
to check the status again
or
End
to end the service function and exit.
Figure 10-23
NOTE
1. In the case of a particle filter heavily loaded with soot, it can occur that
the regeneration request is blocked again after a short time or is not
released. In this case, it is required to regenerate the particle filter in a
motorway or cross-country trip taking approx. 30 minutes at a speed
