73
[2]
Reset adjustment to 0
[3]
End with programming (the new value is permanently stored)
[4]
End without programming (the old value is retained)
Enter new value for adjustment
From the
Starting Basic Inspection Quantity
menu use the
LEFT/RIGHT
scroll button to select
[1]
and press the
OK
button. The screen displays as
below. You will need to input a new value for fuel delivery rate adjustment.
Figure 10-13
Figure 10-14
NOTE
The input data must be in the reasonable range. If it is out of range, a
warning message “Permissible adjustment range exceeded.” Will display.
Reset adjustment to 0
From the
Starting Basic Inspection Quantity
menu select
[2]
and press
OK
. The tool will automatically reset the value to zero.
Store data and exit
When you have finished the fuel delivery rate adjustment, select
[3]
and
press
OK
to store the new value in the control units; or, select
[4]
and press
OK
to retain the old value.
