Mr. Wu
10
english
5. PROBLEMS AND SOLUTIONS
problem
reason
solution
door glass gets sooty too fast
bad chimney draught
generally: door glasses must be cleaned with
Austroflamm glass cleaner from time to time
(depending on the frequency of use)
contact your chimney sweep (elongate
chimney/draught metering)
briquettes won’t fit in the infeed
keep to the quantity, the form and the length as
mentioned in the instruction, adjust briquette diameter
stove does not get enough
combustion air
chimney draught not sufficient
contact your chimney sweep (elongate
chimney/draught metering)
stove smells strongly and there
is smoke on the outside
surface
baking phase of the varnish
there may be some odour development during the
first operations
stove is dusty/dirty
clean before the heating season starts!
exhaust gas emission
chimney draught not sufficient, flue
pipe connection leaky
inspect joints and seal up again if necessary.
check chimney draught and review operation
the stove door was opened before
the briquette has burnt down to
embers
put more fuel into the combustion chamber only if
there are no more embers left
control/infeed
feeding of the briquette/s has
stopped
check the battery display on the control panel. If the
bottom LED blinks, please change batteries (6 x AA)
or cut-off power supply
