© 2009 Austin Kontore LLC
Page 15 of 54
Drill holes about 4” from each corner (total of 8 holes, 2
for each corner) about ¾” from edge of the plywood.
Attach with ¾" Lathe screws. There will be (2) screws per
corner, totaling (8) for the corners.
In total you will use (10) ¾” Lathe screws. Two for the
center, and eight for the corners.
Insert three ¾” Lathe screws (finger tight) into each 19”
piece of pre-drilled weather stripping.
Align the 19” piece of weather stripping to the edge of the
door assembly. The edge of the weather stripping should
be flush with the edge of the door.
Optional:
When attaching the weather stripping you can
apply a thin coat of glue between the wooden strip and
the door. The glue will augment the three Lathe screws to
provide additional strength.
Make sure that the 19” piece of weather stripping is
equally spaced between the top and bottom edges of the
door.
There should be about 1” of space between the
top/bottom edge of the door and the strip.
