WARNING
Do not operate this machine unless you have read and understand the safety
and operational instructions contained in this Operator’s and Safety Manual
and have been instructed and trained in the safe operation of this Forklift.
REMEMBER THAT “YOU” ARE THE KEY TO SAFETY.
General
comments
Operator responsibilities
Before using the forklift that is initially unfamiliar, you should read the Operator’s
and Safety Manual carefully and resolve any doubts with a supervisor
(fig. 1)
. It is
your responsibility to read and understand this Operator’s and Safety Manual before
operating any rough terrain forklift. This Operator’s and Safety Manual takes you step by
step through your working day.
In order to help you better understand the text, graphics have been provided in this
Operator’s and Safety Manual.
It’s important that you know and apply all applicable laws and rules including OSHA
requirements for operator training and certification.
The forklift must only be used by authorized and correctly trained personnel
AUSA manufactures its forklifts in accordance with ASME B56.6 and the corresponding
International Standards.
The Occupational Safety and Health Administration (OSHA) enforces federal laws that
apply to safety of operation, application and maintenance of equipment on a worksite.
Because it is an employer’s responsibility to apply these laws, an OSHA representative
may periodically inspect a worksite to see that these laws are being followed. There may
also be local or state/provincial laws that apply to this equipment and its use along with
specific worksite or employer rules. It is important that you know and apply all applicable
laws and rules.
Any danger resulting from improper use, not complying with these provisions or others
which are specifically provided with the machinery, shall be the responsibility of the user
and not of AUSA.
This section provides instructions on the use of the forklift, in accordance with that
established by ASME B56.6, normative 2006/42/EC and OSHA documents..
Description of a forklift truck
A forklift truck is a powered vehicle used for transporting or handling loads with the aid of
tools specific to the task to be carried out. The forklift is able to lift loads. It consists of a
resistant chassis resting upon two axles. The front axle is the drive axle and the rear axle
the steering axle, although versions exist in which both axles are driving axles.
At the front of the forklift there is a mast, along it moves the front carriage. The unit
formed by both is designed to lift and tilt the load forwards and backwards, making
handling easier .
C 400 H / C 400 HI / C 400 H x4 / C 400 HI x4
C 500 H / C 500 HI / C 500 H x4 / C 500 HI x4
50
(fig. 1)
Special
Safety
Messages