Entering and leaving the operator cabin
Do not hold or pull the steering wheel to enter the driver cabin, use the handles provided
on the front structure of the overhead guard. Always place one foot on the tread of the
sill to prevent slipping when climbing in or out
(fig. 1)
.
Adjusting the seat and steering wheel (fig. 2, 3, 4, 5)
Before using the forklift, adjust the seat and steering wheel to a comfortable driving
position.
On all machines the operator is able to adjust the seat in the fore-aft direction by lifting
knob
(a)
and sliding seat to the desired position, then releasing the knob to lock the
seat into position.
The seat may be adjusted for drivers weight by lifting or lowering lever
(b)
downwards to
the relevant position, as indicated by the scale in de middle of the seat.
It is also possible to adjust the seat backrest angle. The seat backrest tilts forward or
backwards by lifting knob
(c)
.
The position of the steering wheel is adjusted by inclining the steering column. The lever
(d)
unblocks the steering column and can be adjusted to the correct position. To block
again bolt the lever.
C 400 H / C 400 HI / C 400 H x4 / C 400 HI x4
C 500 H / C 500 HI / C 500 H x4 / C 500 HI x4
67
Operating the
forklift
(fig. 5)
(fig. 2)
a
(fig. 3)
b
(fig. 4)
c
(fig. 1)
