Rotating beacon bulb: replacing (fig. 1, 2)
- Turn the amber cover
(a)
of the rotary beacon to the left and remove.
- Unhook the plate
(b)
holding the bulb by pressing it inwards and to the left at the
same time.
- Replace the bulb with a new bulb of the same type and power.
CAUTION
Do not touch the surface of the glass of the bulb. If it is dirty wipe gently using
a clean dry cloth.
- Fasten the plate holding the bulb by pressing it inwards and to the right at the
same time.
Electrical system
Steering column fuses: checking (fig. 3)
- Switch off the ignition.
- Remove the protective cover from the fuses by pulling it outwards.
- The burnt fuse can be recognised as the metal strip which is visible in the centre
of each fuse will have melted (viewing window).
- Remove the burnt fuse and replace with a new fuse of the same type.
CAUTION
Do not use fuses of a higher value, this could cause major damage.
Battery fuses: checking (fig. 4)
- Switch off the ignition.
- Remove the protective cover from the fuses
(c)
.
- The burnt fuse can be recognised as the metal strip which is visible in the centre
of each fuse will have melted (viewing window).
- Remove the burnt fuse and replace with a new fuse of the same type.
CAUTION
Do not use fuses of a higher value, this could cause major damage.
(fig. 1)
a
b
c
(fig. 2)
(fig. 3)
(fig. 4)
Periodic
Maintenance
Operations
C 400 H / C 400 HI / C 400 H x4 / C 400 HI x4
C 500 H / C 500 HI / C 500 H x4 / C 500 HI x4
97