4x4 connection (FullGrip
®
System) (fig. 1)
Connecting the 4x4
The 4x4 connects by pressing yellow switch
(g)
located underneath the joystick at the
right side.
Disconnecting the 4x4
The 4x4 disconnects just leaving yellow switch
(g)
on its rest position.
DANGER
Do not conect the 4x4 driving at high speed
REMARK:
red switch
(h)
located underneath the joystick at the left side does not have
any function.
Moreover, some models may differ from
(fig. 1)
and assemble a plastic plug instead of
red switch
(h)
.
Load handling controls (fig. 2)
The mast and the load are moved by using the joystick.
Raising and lowering the mast.
If the joystick is pulled backwards the mast and the forks lift and if pushed forwards the
mast and the forks lower.
Tilting the forks.
If the joystick is pulled to the left, the mast forks tilt backwards (forks lift) and if pushed
to the right, they tilt forward (forks lower).
Side-shift.
By holding down button
(5)
on the joystick and pulling the joystick to the left, the forks
move to the left.
By holding down button
(5)
and pushing the joystick to the right the forks move to the
right.
Always centre the carriage when in transit or when transporting a load.
Additional hydraulic control for attachments (
) (fig. 3).
By holding down button
(6)
of the joystick and pulling it to the left (towards the operator),
or pushing it to the right, pressure is supplied to the quick hydraulic couplings located
on the left-hand side of the mast.
C 400 H / C 400 HI / C 400 H x4 / C 400 HI x4
C 500 H / C 500 HI / C 500 H x4 / C 500 HI x4
61
Controls
Instruments
Equipments
Controls
Instruments
Equipments
(fig. 3)
(fig. 2)
(fig. 1)
g
h
