WARNING
This forklift is not designed to travel with elevated load or with the mast tilted
forward.
Do not tilt forward the mast with the forks elevated except to pick up or deposit
the load.
The fully forward tilting mast angle is only intended to transport the forklift on a
truck bed, always without load.
For operating with load do not exceed 10º for the forward tilting mast angle.
Carriage way and forks
FEM III class (C400H-HI / C400H-HI x4)
FEM IV class (C500H-HI / C500H-HI x4)
Lifting
speed
Unladen: 21.65 in/sec (0.55 m/s)
Laden: 20.47 in/sec (0.52 m/s)
Lowering
speed
Unladen: 22.44 in/sec (0.37 m/s)
Laden: 18.34 in/sec (0.466 m/s)
Control panel and controls
The controls, switches and warning lights are incorporated into the steering column and
below the joystick.
Lighting
(
)
Operating lights, park lights, indicators and hazard warning light equipment.
Overhead
guard
Constructed in accordance with ISO 3449 / ISO 3471 and ASME B56.6 standards.
WARNING
The operator is protected by an overhead guard which complies with the ISO
3449 / ISO 3471 and ASME B56.6 standards. It provides protection against
falling objects and together with the mast, provides protection should the
forklift overturn. The seat belt is an important part of the safety system and
should always be fastened before starting to operate the forklift. In the event of
the forklift overturning, if the seat belt is not fastened the operator may suffer
serious injury or even loss of life as a result of crushing from the forklift or even
the overhead guard itself.
C 400 H / C 400 HI / C 400 H x4 / C 400 HI x4
C 500 H / C 500 HI / C 500 H x4 / C 500 HI x4
12
Technical
specifications