background image

22 

APPENDIX 7      Warranty

 

 

Aurora Multimedia Corp. (“Manufacturer”) warrants that this product is free of defects in both materials and 

workmanship for a period of 3 years as defined herein for parts and labor from date of purchase.   Motorized 

mechanical parts (Hard Drives, DVD, etc), mechanical parts (buttons, doors, etc), remotes and cables are covered 

for a period of 1 years.   Batteries are not covered by this warranty.   During the warranty period, and upon proof of 

purchase, the product will be repaired or replaced (with same or similar model) at our option without charge for 

parts or labor for the specified product warranty period. 

 

This warranty shall not apply if any of the following: 

A) The product has been damaged by negligence, accident, lightning, water, act-of-God or mishandling; or, 

B) The product has not been operated in accordance with procedures specified in operating instructions: or, 

C) The product has been repaired and or altered by other than manufacturer or authorized service center; or, 

D) The product's original serial number has been modified or removed: or, 

E) External equipment other than supplied by manufacturer, in determination of manufacturer, shall have affected 

the performance, safety or reliability of the product. 

F) Part(s) are no longer available for product.          

 

In the event that the product needs repair or replacement during the specified warranty period, product should be 

shipped back to Manufacturer at Purchaser's expense.   Repaired or replaced product shall be returned to 

Purchaser by standard shipping methods at Manufacturer's discretion.   Express shipping will be at the expense of 

the Purchaser.   If Purchaser resides outside the contiguous US, return shipping shall be at Purchaser's expense.   

 

No other warranty, express or implied other than Manufacturer's shall apply. 

                  

Manufacturer does not assume any responsibility for consequential damages, expenses or loss of revenue or 

property, inconvenience or interruption in operation experienced by the customer due to a malfunction of the 

purchased equipment. No warranty service performed on any product shall extend the applicable warranty period. 

 

This warranty does not cover damage to the equipment during shipping and Manufacturer assumes no 

responsibility for such damage. 

 

This product warranty extends to the original purchaser only and will be null and void upon any assignment or 

transfer. 

 

 

 

Summary of Contents for VPH-100



























Reviews: