Aurora Multimedia VPH-100, Owner'S Manual

Page: 20 / 26

17
APPENDIX 4 RS-232/LAN Control Protocol
RS232 Control LAN Control (RPC calls via HTTP Post)
TRS (Tip, Ring, Sleeve) connector
Tip - TX
Ring - RX
Sleeve - Ground
Baud Rate - 9600, 8, N, 1, N
Examples:
!VOL024<CR>
Will set the volume on the V-Tune Pro
HD to 63
?VOL<CR>
Will query the current volume on the
V-Tune Pro HD
~VOL024<CR>
Will be the response from the VTune Pro
HD
If a command in the RS-232 protocol is !<CR> then the RPC
will use just the .
Every command requires a password parameter at the end (0000 by
default).
Examples:
Here is a sample RPC command, where the tuner IP address is
192.168.1.200…
http://192.168.1.200/RPC/?method=Send_Command&cmd=
VOL024&password=0000
Will set the volume on the V-Tune Pro HD to 24
http://192.168.1.200/RPC/?method=Get_Status&cmd=
VOL&password=0000
Will query the current volume on the V-Tune Pro HD
cmd=PWRON&status=1
Will be the response from the VTune Pro HD
cmd=PWRON&status=0&error=Power%20already%20on
Will be the response from the VTune Pro HD if there is an error
Please visit http://auroramultimedia.com for more details
NOTES:
! IS A COMMAND (Does not have to be case sensitive)
? IS A QUERY COMMAND (Does not have to be case sensitive)
~ IS A RESPONSE (All responses are capitals)
“<CR>” Represents a carriage return (Hexidecimal character „0D‟)
Command Description
!KEY_LEFT<CR> Left arrow key
!KEY_RIGHT<CR> Right arrow key
!KEY_UP<CR> Up arrow key
!KEY_DOWN<CR> Down arrow key
!KEY_OK<CR> Menu select
!KEY_CH-<CR> Channel down
!<CR> Channel up
!KEY_LAST<CR> Toggles between the current channel and last channel
!KEY_ENTER<CR> Enter button for channel selection
!KEY_0<CR> 0
!KEY_1<CR> 1
!KEY_2<CR> 2
!KEY_3<CR> 3
!KEY_4<CR> 4
!KEY_5<CR> 5
!KEY_6<CR> 6
!KEY_7<CR> 7
!KEY_8<CR> 8
!KEY_9<CR> 9
!KEY_.<CR> .