Aurora Multimedia VPH-100, Owner'S Manual

Page: 12 / 26

9
Setup
Press the “Menu” and

buttons to highlight Setup
and press the “OK” button on
the remote control to show sub-menus.
Output Resolution
1. Press the

buttons to select
“Resolution” and press “OK”.
2. Press

to select the output video resolution
and press the “OK” button on the
remote control.
3.
Press the “Exit” button on the remote control to return to the previous menu.
Note : Video & S-Video outputs only support 480i mode.
OSD Opacity
1. Press

to highlight the “OSD Opacity” and press “OK”.
2. Press

to change the percentage of the
OSD background‟s transparency.
3.
Press the “Exit” button on the remote control to return to the previous menu.
I-Plate
The Information Plate displays channel, signal source, resolution and (if available)
programming data on the screen upon channel changes. To see or hide I-Plate:
1. Press

to change the I-Plate display to
“On” or “Off” mode.
2.
Press the “Exit” button on the remote control to return to the previous menu.
Power Saving
1.
Select the “Power Saving” you can press 
to turn the power saving function
on or off.
2.
Press the “Exit” button on the remote control to return to the previous menu.
Note :
Power saving off will leave the main-system operational but video and audio sub
systems will be put into software standby for quick power-up.
Power saving on will tell the subsystems to come out of sleep mode and start
things again right away
Time Zone
1. Press
 to highlight Time Zone” and press “OK”. Press 
to change time
zone and D.S.T. (Daylight Saving Time) settings.
2. Pres
s the “Exit” button on the remote control to return to the previous menu.