Aurora Multimedia VPH-100, Owner'S Manual

Page: 21 / 26

18
!<CR> Volume up
!KEY_VOL-<CR> Volume down
!KEY_MUTE<CR> Volume mute
!KEY_PWR<CR> Power On / Off
!KEY_MENU<CR> Menu
!KEY_EXIT<CR> Exit
!KEY_INFO<CR> Info
!KEY_CC<CR> Closed Captioning
!KEY_EPG<CR> Electronic Programming Guide (For future use)
!KEY_PAGE<CR> Page (For future use)
!KEY_PLAY<CR> Play (For future use)
!KEY_REC<CR> Record (For future use)
!KEY_PAUSE<CR> Pause (For future use)
!KEY_STOP<CR> Stop (For future use)
!KEY_PREV<CR> Skip Previous (For future use)
!KEY_REV<CR> Scan Reverse (For future use)
!KEY_FWD<CR> Scan Forward (For future use)
!KEY_NEXT<CR> Skip Next (For future use)
!KEY_ASPECT<CR> Skip Next (For future use)
!PWRON<CR> Discrete Power On
!PWROFF<CR> Discrete Power Off
?PWR<CR> Query Power status responds with ~PWRON<CR>or ~PWROFF<CR>
!VOLxxx<CR> Volume Level Set xxx=000 to 025 Responds with ~VOL024<CR>for volume level 24.
?VOL<CR> Query Volume Level Responds with ~VOL010<CR>for volume level 10.
?MCH<CR> Query Main Channel Responds with ~MCH002.00<CR>for channel 2.
!MCHxxx.xx<CR> Main TV Channel change !MCH025.00<CR>for channel 25. xxx.xx = 001.99 to 135.99
?MIN<CR> Main Input Query responds with ~MTV<CR>or ~MFM<CR>
?VER<CR> Version Query responds with ~VER 1.00<CR>if version 1.00 was present.
!CC1<CR> Closed Caption 1 selection
!CC2<CR> Closed Caption 2 selection
!CCOFF<CR> Closed Caption Off selection
?CC<CR> Query Closed Caption responds with either ~CC1<CR>, ~CC2<CR>
!LOCKx<CR> Lockout Selection. X=0-3 (0=none, 1=keypad, 2=IR, 3=Both)
?LOCK<CR> Lock responds with ~LOCK1<CR>for keypad.
?PVR<CR>
Responds with ~PVR0<CR>for HDD playback status (0=Stop, 1=Play, 2=Pause,
3=Rec, 4=Prev, 5=Next, 6=FWD, 7=REV). (For future use)
!ASPECT_LETTER<CR>
For a picture with an original 16:9 format, to fill the screen with bar on the top and
bottom of the screen.
!ASPECT_PILLAR<CR>
For a picture with an original 4:3 format to keep 4:3 aspect ratio on a 16:9 screen with
bars on the left and right sides of the screen.
!ASPECT_CROP<CR>
For a picture filling the entire screen by cropping the left and right portions of the
picture.
!ASPECT_FULL<CR> For a full picture filling the entire screen with no bars.
!RES_480i<CR> Sets output resolution to 480i.
!RES_480p<CR> Sets output resolution to 480p.
!RES_720p<CR> Sets output resolution to 720p.
!RES_1080i<CR> Sets output resolution to 1080i.
!RES_1080p<CR> Sets output resolution to 1080p.
?RES<CR> Responds with ~RES_xxxxx<CR>, xxxxx is the current resolution
!MTS_STEREO<CR> Sets MTS mode
!MTS_MONO<CR> Sets MTS mode