8
Assembly Instruction
KS 4 S12 24V DC R
N
OTE
Post warning signs!
Other persons must be kept away from
the casement when a hold-to-run switch
(pushbutton) is operated or when a
window, which has been opened by a
smoke and heat exhaust system, is clo-
sing!
The operating element of hold-to-run
switches must be installed within di-
rect view from the window, but apart
from moving elements. If the switch is
not a key-operated switch it must be
installed at a minimum height of 1,5 m
and inaccessible to the public!
Do not allow children to play with
permanently mounted control devices
and keep remote controls out of reach
for children!
!
C
AUTION
!
C
AUTION
!
C
AUTION
During cleaning, maintenance work and while
exchanging parts the drive must be comple-
tely disconnected from the power supply and
secured against unintentional reactivation.
During the proper assembly of drives with mounting
elements at a window, and the connection to an external
control unit, the interfaces resulting from mechanical and
electrical performance characteristics of single elements
shall be observed.
!
W
ARNING
Do not use drive or casement when repair
or re-setting work has to be performed!
Replacement parts, fasteners and controls
The drive shall only be operated with control devices from
the same manufacturer. There is no liability, warranty or
customer service if third-party parts are used. Exclusively
original replacement parts of the manufacturer shall be
used for mounting elements or expansions.
Ambient conditions
The product may not be subjected to impacts or falls, or
to vibrations, moisture, aggressive vapors or other harmful
environments, unless the manufacturer released it for one
or more of these environmental conditions.
•
Operation:
Ambient temperature: -5 °C … +75°C
Relative humidity:
< 90% less 20°C;
<
50%
less
40°C;
no
formation
of
condensation
•
Transport / Storage:
Storage temperature: -5°C … +40°C
Relative humidity:
< 60%
Accident prevention regulations and workmen’s
compensation insurance guidelines
For work on or in a building or building part the provisi-
ons and instructions of the respective accident prevention
regulations (UVV and workmen’s compensation insurance
guidelines (BGR /ASR) shall be observed and adhered to.
Declaration of Conformity
The drive is manufactured and inspected in accordance with
European guidelines. The respective Declaration of Con-
formity is on hand.
In case the operation of the drive differs from the
intended use, a risk evaluation for the complete
power-operated window system shall be performed
and a Declaration of Conformity according Machinery
Directive 2006 / 42 / EG issued.
S
AFETY
INSTRUCTIONS
01
