AUMA SA3-SA100, Manual

Page: 13 / 48

13
3 Front panel details
This section outlines the front panel details of actuators. The functions of each of these
components are discussed below.
3.1 Selector switch
Two rotary selector switch configurations are available.
1. There are 3 modes available: OFF, ESC & ENTER.
2. There are 2 states available: UP & DOWN.
3.2 LCD screen & LED indication
LCD screen A graphical LCD is designed for the new actuator series. The LCD has scroll in (up down
feature) and an Enter that can be operated through Hall Effect selector switches.
This LCD broadly has two types of screens: Setting screens and Main screens.
Each screen has a specific number identification. A new navigation feature is added, for
LCD screens. If a particular screen number is entered, then the screen navigates to the
respective display screen.
On power up, the screen is as indicated below.
The basic LCD view is split into two lines. The first line shows the status details - The left
half shows selector switch position status and the actuator running status alternatively.
The right half of the first line represents Valve Position (VP) in terms of percentage. The
valve position display feature is optional. If required, an appropriate Electronic Position
Transmitter (EPT) must be chosen for this feature. Please contact AUMA India for more
information.
The second line is used to represent only faults. The faults/warnings if any toggle in the
sequence of occurrence. The details are as shown in the Fig.
Weather proof actuators with 3.XMP-SIL &
Data logging