Read operation instructions first.
●
Observe safety instructions.
●
These operation instructions are part of the product.
●
Store operation instructions during product life.
●
Pass on instructions to any subsequent user or owner of the product.
Target group:
This document contains information for assembly, commissioning and maintenance staff.
Table of contents
Page
1.
Safety instructions.................................................................................................................
1.1.
Prerequisites for the safe handling of the product
1.2.
Range of application
1.3.
Warnings and notes
1.4.
References and symbols
2.
Short description...................................................................................................................
3.
Name plate..............................................................................................................................
4.
Transport and storage...........................................................................................................
4.1.
Transport
4.2.
Storage
5.
Assembly................................................................................................................................
5.1.
Mounting position
5.2.
Fit ball handle to handwheel
5.3.
Mount actuator to valve
5.3.1.
Overview on coupling variants
5.3.2.
Mount actuator (with coupling)
6.
Electrical connection.............................................................................................................
6.1.
Basic information
6.2.
Open terminal compartment
6.3.
Cable connection
6.4.
Close terminal compartment
6.5.
External earth connection
7.
Commissioning......................................................................................................................
7.1.
End stops in part-turn actuator
7.1.1.
Set end stop CLOSED
7.1.2.
Set end stop OPEN
7.2.
End position setting (via push buttons)
7.2.1.
Set end position CLOSED
7.2.2.
Set end position OPEN
7.3.
Position indicator setting
7.3.1.
Position indication for 90°
7.3.2.
Position indication for 120°
7.3.3.
Position indication for 45° – 360°
7.4.
Configuration of further parameters
7.4.1.
Speed setting
2
PF-Q80 – PF-Q600
Table of contents
