Page
4
of
12
2. Transport, storage and packaging
Transport
Transport to place of installation in sturdy packing.
Storage
Store in well-ventilated, dry room.
Protect against floor dampness by storage on a shelf or on a wooden pallet.
Cover to protect against dust and dirt.
Apply suitable corrosion protection agent to bare surfaces.
In case gearboxes are to be stored for a long period (more than 6 months), the following points must be
observed:
Prior to storage: Protect bare surfaces, in particular the output drive parts and mounting surface,
with long-term corrosion protection agent. .
Check for corrosion approximately every 6 months. If first signs of corrosion show, apply new
corrosion protection.
Packaging
Our products are protected by special packaging for the transport ex works. The packaging consists of
environmentally friendly materials which can easily be separated and recycled. For the disposal of the
packaging material, we recommend recycling and collection centers. We use the following packaging
materials: Wooden material boards (OSB)/cardboard/paper/PE film
3. Fitting the hand wheel
For gearboxes designed for manual operation, the hand wheel is supplied separately. Fitting is done on
site according to figure 1.
Figure 1
