Aulisa Guardian Angel Rx GA2000, Instructions For Use Manual

Page: 51 / 79

Care
and
Maintenance
Cleaning and Disinfection
Clean surface of and disinfect the finger sensor before each use. For
surface cleaning and disinfection, follow the recommended actions
below.
Surface cleaning : Clean the surface of the finger sensor with a soft
cloth dampened with rubbing alcohol. Lightly wipe the surface of the
device.
Disinfection : Use a soft cloth saturated with a solution of 10% chlorine
bleach in tap water, lightly wiping the surface of the device.
Do not pour or spray any liquids onto components, and do not allow any
liquids to enter any openings in the device. Allow the unit to dry
thoroughly before reuse.
Do not immerse the device in liquid, and do not use caustic or abrasive
cleaning agents on the device.
The advanced digital circuitry within the Oximeter Box of this system
requires no calibration or periodic maintenance, neither does the
Display Unit or the Receiver/Transponder.
Field service or repair of this system is not possible. Do not attempt to
open the case. Opening the Oximeter Box, the Receiver/Transponder
or the Display Unit will damage the device and void the warranty. If the
system is not functioning properly, see “Troubleshooting” section on page
48 for more information.
The expected service life of Aulisa GA2000 System is 18 months.
48