Aulisa Guardian Angel Rx GA2000, Instructions For Use Manual

Page: 31 / 79

Pairing
Oximeter Box
The system will automatically scan and pair to the Oximeter Box from
the same starter kit only when the connection between the Display Unit
and the Receiver/Transponder has been established.
NOTE: The Oximeter Box must be used within 10 meters (32.8 feet) from
the Receiver/Transponder.
NOTE: The Bluetooth connection status icon on the Display Unit will turn blue
once the Oximeter Box is paired.
NOTE: The power On/Off LED on the Oximeter Box will blink green when
the data are being transmitted.
Use the following procedure to manually setup pairing of a new Oximeter
Box:
NOTE: Up to four Oximeter Boxes can be stored on the Display Unit.
1. Ensure the desired Oximeter Box is turned on. (See “Power and Charging”
section on page 44 for more information.
NOTE: The power On/Off LED on Oximeter Box lights green when the
power is on.
2. In the settings menu of the Display Unit, select “PAIRING”. Then, select
“OXIMETER BOX.”
3. Scan the QR Code or manually key in the serial number located
on the back of the desired Oximeter Box.
4. Press “CONFIRM” if the serial number (SN) displayed matches with the
SN on the back of desired Oximeter Box.
5. To confirm that the process was successful, ensure that the Bluetooth
connection status icon on the MAIN screen of the Display Unit is lit blue.
NOTE: The Oximeter Box must be used within 10 meters (32.8 feet)
from the Receiver/Transponder
.
28