Aulisa Guardian Angel Rx GA2000, Instructions For Use Manual

Page: 26 / 79

7. Secure the wristband onto the patient's wrist with the holder facing
outwards. Slip the velcro end through the hole and loop around to
secure the wristband. Adjust the wristband according to wrist size,
leaving proper space of about one or two fingers to allow ventilation.
NOTE: The wristband should be worn with the arrow indicator facing
towards the patient's hand.
8. Insert the Oximeter Box into the holder. Attach the sensor probe to
the thumb or finger, making sure that the sensor cable runs over the
top of the patient's hand.
Only use sensor cables supplied or manufactured by Taiwan Aulisa
Medical Devices Technologies, Inc.
Do not charge the device via this port. Charging through this port will
cause permanent damage to the device.
C aut ion!
C
aut
ion!
23