Aulisa Guardian Angel Rx GA2000, Instructions For Use Manual

Page: 32 / 79

Receiver/Transponder
Use the following procedure to manually setup pairing of a new Receiver/
Transponder:
NOTE: Only one Receiver/Transponder can be stored on the Display Unit
at a time.
NOTE: The alarm event history on the Display Unit is managed via the
Receiver/Transponder, so you won’t be able to see the current alarm
event history when the Display Unit is paired to a new Receiver/
Transponder.
1. Turn on the desired Receiver/Transponder by pressing and holding the power
On/ Off button for 3 seconds. Wait until the Wi-Fi Link LED lights red. (See
“Power and Charging”section on page 47 for more information.)
NOTE: The power On/Off LED on Receiver/Transponder lights green when
the power is on.
2. In the settings menu of the Display Unit, select “PAIRING”. Then, select
“Receiver/Transponder.”
3. Scan the QR Code or manually key in the located on the
CODE
back of the desired Receiver/Transponder.
4. Press “CONFIRM” if the pairing code displayed matches with the
CODE
on the back of desired Receiver/Transponder.
5. Follow the onscreen instructions on the Display Unit to setup the Wi-Fi
connection of the Receiver/Transponder.
29