27
Device Power Off
Display Unit
Step 1:
Press the Power button for at least three (3) seconds until a message
displayed.
Step 2:
Choose “Power off” to turn off the Display Unit.
Receiver/Transponder
Press and hold the Power button for at least three (3) seconds to turn off the
Receiver/Transponder.
Device Powering
Display Unit
The Display Unit is meant to be used with the charging adaptor (Type-C end) ALWAYS
plugged in. If the Display Unit is disconnected from the charging adaptor accidentally,
proceed with the following steps to charge and power the Display Unit. The Display
Unit will alert the user when the Display Unit itself is low on battery.
Step 1:
Plug the Type-C end of the charging adaptor into the Display Unit.
Step 2:
Attach the wall adaptor to a power outlet.
Step 3:
Place the Display Unit on the stand provided.
NOTE:
You may also tap on the “SLEEP” button to enter the sleep mode.
NOTE:
The power LED goes off when the Receiver/Transponder power off.
Summary of Contents for Guardian Angel GA2000 Series
Page 5: ...4 Guide to Symbols...
Page 6: ...5...
