20
Step 5:
Press and hold the Power button for three (3) seconds to turn on the Display
Unit.
Step 6:
Follow the onscreen instructions on the Display Unit to complete the system
setup.
Step 7:
Set up the Aulisa sensor module(s).
Step 8:
The Receiver/Transponder will automatically connect to paired Aulisa sensor
module(s) under the control of the Display Unit. Once connected, the vital
signs and the Aulisa sensor module(s) status information will appear on the
MAIN screen.
CAUTION!!!
Always keep the Display Unit plugged in.
CAUTION!!!
Do not plug the adaptor into a switched outlet to prevent accidental
switching power off.
NOTE:
Check the top right corner of the MAIN screen. Ensure the Receiver/Transponder
connection indicator is lit blue and the Wi-Fi connection indicator has a strong signal.
NOTE:
Refer to “Device Connection” section below for more information.
NOTE:
Refer to the Aulisa sensor module(s) Instructions for Use for setting up
instructions.
NOTE:
Refer to “Device Pairing” sections below for more information.
NOTE:
The Aulisa sensor module(s) must be used within 32.8 feet (10 meters) to the
Receiver/Transponder.
NOTE:
The Bluetooth connection status icon will turn blue once the pairing succeeds.
NOTE:
Verify System Operation before use. (See “Device Verification” section for more
information.)
Summary of Contents for Guardian Angel GA2000 Series
Page 5: ...4 Guide to Symbols...
Page 6: ...5...
