18
Device Setting Up
Before you begin your monitoring session, unpack the Display Unit and
Receiver/Transponder and become familiar with their parts.
Step 1:
Connect the charging adaptor (micro-USB end) to the Receiver/Transponder
and a power outlet.
Step 2:
You may simply place the Receiver/Transponder on a table or follow the
instructions below to assemble the holder and the clamp so that the
Receiver/Transponder can be clamped onto the furniture or hung on the
wall.
Clamp onto the furniture
(a)
Pull down the clip and slide
the Clamp into the Holder.
(b)
Ensure the Clamp is stable.
(c)
Secure the Clamp onto the
furniture. Place the
Receiver/Transponder body on
the Holder.
(d)
Secure the power cable to the
Holder with Velcro strap.
Summary of Contents for Guardian Angel GA2000 Series
Page 5: ...4 Guide to Symbols...
Page 6: ...5...
