24
It is possible to freely configure the HELIX
P SIX DSP with our DSP PC-Tool software. The
user interface is designed for easy handling of all
functions and allows an individual adjustment of
each of the 8 DSP channels. Prior to connecting the
amplifier to your PC, visit our website and down
-
load the latest version of the DSP PC-Tool software.
Check from time to time for software updates.
You will find the software and the respective user
manual on
www.audiotec-fischer.com
.
We strongly recommend to carefully read the user
manual before using the software for the first time in
order to avoid any complications and failures.
Important:
Make sure that the amplifier is not con
-
nected to your computer before the software and
USB driver are installed!
To install the software follow the next steps:
1. Download the DSP PC-Tool software from the
website www.audiotec-fischer.com.
2. Install the software on your computer. During
that process the required USB driver will be au
-
tomatically installed as well.
3. After the software installation process is com-
pleted you can now connect the amplifier to
your PC with the provided USB cable. Don’t
extend the supplied cable by using any passive
USB extension cable. If you need to cover lo ng-
er distances between your PC and the HELIX
P SIX DSP then use an active USB repeater
cable.
4. Turn on the amplifier and then start the soft
-
ware. If the firmware is not the latest version it
will automatically be updated.
5. You are now ready to configure the HELIX
P SIX DSP according to your demands.
Comprehensive
operating
instructions
for the software can be downloaded from
www.audiotec-fischer.com.
Caution:
We strongly recommend not to connect
anything to the pre-amplifier outputs or speaker
outputs of the HELIX P SIX DSP before the basic
configuration of the amplifier has been completed.
Ignoring this advice may result in damaging the
connected speakers, especially if you are running a
fully active configuration.
Connection to a PC
1
Load and save
2
Main menu
3
Channel configuration
4
Highpass filter
5
Lowpass filter
6
Time alignment
7
Output level
8
Frequency graph
9
Range of frequency graphs
10
Equalizer
11
EQ fine adjustment
8
1
6
3
4
7
5
2
9
10
11
