21
6
Usage
6.1
Switching on and off
Please make sure that the PLANCK is correctly connected to the (pre-)amplifier
and the mains (refer to sections 'Installation and power supply' on page 9 and
'Outputs and inputs' on page 12). The display will light up with the Audionet logo,
followed by a welcome message as soon as the PLANCK is connected to the
mains. The display stays dark afterwards. The unit is in stand-by mode now.
Please make sure that the cover is closed before switching the unit on. Then
power the PLANCK up by pressing the key on the front panel. The PLANCK
will show the message
WAKING UP...
If the cover is still open, the display reads
OPEN
. If you activated the unit with
closed cover and no inserted disc, the message
No Disc
will appear in the dis-
play after a short time.
Please refer to the sections 'Inserting and removing discs' on page 23 and 'Playing
discs' on page 31 to read more on inserting, removing and playing discs.
If you would like to switch the unit off, press the key on the front panel. The
message
GOING TO SLEEP...
will appear on the display while powering
down the unit. Afterwards the display stays dark – the PLANCK is in stand-by
mode.
Note
•
The PLANCK powers up automatically after it is connected to mains and
starts playing the inserted CD, if the option
Set AutoPlay
has the values
power on only
or
power on & disc change
(refer to section 'Set
AutoPlay' on page 52).
•
Of course the PLANCK may be switched on or off at any time with the Au-
dionet Metal Remote Control (refer to section 'Audionet Metal Remote Con-
trol' on page 26.
