11
4.4
Connecting the external power supply AMPERE
To use the optional external power supply AMPERE with your PLANCK follow
these steps:
1.
Make sure both – the PLANCK and the AMPERE – are switched off and
disconnected from the mains.
2.
Connect the AMPERE with the included cable to input jack on the back
panel of the PLANCK. The shape of the plug pre-vents any wrong polarity.
The small 'nose' inside the plug has to face upwards. Now screw the ring of
the plug onto the AMPERE input jack .
3.
Connect
both
(!) units (PLANCK and AMPERE) to mains.
4.
Switch the AMPERE on at its back panel first.
5.
Use the key at the front panel or the PLANCK key of the Audionet Metal
Remote Control to switch the PLANCK on. The PLANCK is now ready for
use, getting its power from the external power supply AMPERE.
6.
To switch the PLANCK off into stand-by mode, use the key on the front
panel or the PLANCK key of the Audionet Metal Remote Control.
Important
•
Never power the AMPERE on or off on its back panel while the PLANCK is
still switched on or during playback.
•
For further information regarding the external power supply AMPERE, please
consult its user's manual.
Tip
•
Use a high quality cable to connect the AMPERE to mains. The sound will
improve.
