Continuous sealer
D541
Maintenance
29
7. Push
the bottom cooling plate down-
ward slightly.
8. Slide
the PTFE glass-fibre belt in-
between the cooling plates.
9. Push
the bottom heating element down-
ward slightly.
10. Slide
the PTFE glass-fibre belt in-
between the heating elements.
11. Push
the tension roller (left) inward.
12. Place
the PTFE glass-fibre belt around
the guide roller on the right.
13. Release
the tension roller and allow it to
gently spring back into place.
Always check whether the PTFE
glass-fibre belts run smoothly
across the rollers.
14. Place
the cover back.
15. Tighten
the four bolts again.
