Specifi cations subject to change without notice.
Chart dimensions rounded up to the nearest
1
/
8
"
(millimeters rounded up to next whole number)
.
ROUGH-IN DATA
2001 East Terra Lane • P.O. Box 970 • O’Fallon, Missouri 63366
(636)240-2400 • Fax (636)272-2408 • (800)325-6152 • Intl Fax# (001)636-272-7546
Parts Dept. (800)424-TRUE • Parts Dept. Fax# (636)272-9471 • www.truemfg.com
Model:
TRUE FOOD SERVICE
EQUIPMENT, INC.
Project Name:
Location:
Item #:
Qty:
Model #:
AIA #
SIS #
Printed in U.S.A.
APPROVALS:
AVAILABLE AT:
T
RUE
R
EFRIGERATION
MADE IN
SINCE 1945
U.S.A.
.S.A.
TM
U.S.A.
TA1HPT-1S-1S
TA1HPT-1S-1S
6/07
Provides cabinet holding
temperature of 80˚F to 180˚F (26.6˚C
to 82.2˚C).
Equipped with low-velocity fans
to assure even temperature
distribution throughout the
cabinet. Fans are controlled by
exterior on/off switch.
Two (2) stainless steel (for corrosion
resistance), fi nned tube heating
elements (1000 watts each) for
uniform generation of electric heat.
Cabinet comes with a total of 2000
watts.
300 series stainless steel exterior
front, sides, back and bottom. The
very fi nest stainless with higher
tensile strength for fewer dents and
scratches.
Anodized aluminum interior
cabinet liner. 300 series stainless
steel door liner and fl oor with
coved corners.
Three (3) adjustable, heavy duty
chrome plated wire shelves.
Positive seal self-closing doors with
120º stay open feature. Lifetime
guaranteed door hinges and
recessed door handles.
Entire cabinet structure and solid
doors are foamed-in-place using
high density, CFC free, polyurethane
insulation.
TA Specifi cation Series:
Pass-Thru Solid Door Heated Cabinet
R
®
Model
Doors
Capacity
(Cu. Ft.)
(liters)
Cabinet Dimensions
(inches)
(mm)
L
D
†
H
*
Watts
Voltage
NEMA
Confi g.
Cord Length
(total ft.)
(total m)
Crated
Weight
(lbs.)
(kg)
TA1HPT-1S-1S
2
31
878
29
737
37
1
/
4
947
78
1
/
4
1988
2000
115/208-240/1
14-20P
9
2.74
400
182
†
Depth does not include 1
1
/
8
"
(29 mm)
for system mechanical components.
*
Height does not include 6
1
/
8
"
(156 mm)
for legs, 5
"
(127 mm)
for optional castors and 1
"
(26 mm)
for system mechanical components.
Requires 115/208-240/60 Hz, single phase, 3 pole, 4 wire circuit.
