Continuous sealer
D541
Operation
23
5.4.1 Resetting the default operating settings
Reset the operating settings to the default settings as follows:
1.
During start-up, while the operating
settings are shown in the display,
press
the
START
/
STOP
button until PRG appears
in the display.
The
START
button has to be pressed
during start-up, after the operating
settings are shown in the display.
2. Press
the
ARROW
keys until YES appears
in the display.
3.
Save the changes by pressing the
START
/
STOP
button for 3 seconds.
The sealer is restarted and the
operating settings have been reset
to the default settings: H.01, L.20,
F.01 and S.00.
