14
8.4
V-belts
There are 2 V-belts in the ALL-IN-SEALER. They are located at the lefthand-side of the machine.
8.4.1 Replace v-belts
−
Carry out the activities as described in § 8.2.1.
−
Loosen the nut (fig. 7 pos 1) and slide the shaft (pos 2) to the
right.
−
Replace the v-belt.
−
Tension the v-belt by sliding the shaft (pos 2) to the left, and
fasten the nut.
−
Close all covers.
8.5
Pressure roller
The pressure roller applies an extra pressure onto the cooled seal.
The pressure roller can be replaced by a code roller.
In case the pressure roller is not needed, it can be disabled.
By turning the ring (fig. 8 pos 1) clockwise the pressure roller is lifted
upwards.
Fig. 8
Fig. 7
Summary of Contents for D 555 NH
