Audion Elektro D 555 NH, Manual, Page: 7 / 28

7
6 Installation
6.1 Description of workplace
Install the ALL-IN-SEALER in a ventilated, well illuminated space. Ensure that the ALL-IN-SEALER is not
exposed to direct sunlight, extreme temperatures, damp, dust or sand. The ALL-IN-SEALER is not allowed
to be exposed to mechanical shocks or vibrations.
6.2 Connecting ALL-IN-SEALER
Before connecting the ALL-IN-SEALER, be sure that the power is off, the main switch (fig. 3 pos 1)
must be at position O (OFF).
6.2.1 Adjusting height transport belt
Adjust the height of the conveyor in relation to the seal unit. The bag must be sealed at the half of the
product height.
−
Loosen the two knobs (fig. 2 pos 1).
−
Adjust the height of the transport belt by raising or lowering it manually.
−
If the transport belt is at the correct height, and the transport belt is horizontal, tighten the two knobs
to secure the transport belt.
6.2.2 Connecting to power supply
Connect the power cord into the power supply. The main socket must have an ground connection
and must be max. fused at 16 Ampere.