- Starting Up -
49
3
Starting Up
3.1
Safety notes
Caution:
It is essential to read the General Information Section 1 at the beginning of this manual before
starting up.
3.2
Checking the package contents
The package contains:
a base station
a telephone connection cable
a handset
four rechargeable batteries
a charging unit for the alarm unit
two power adapter plugs
an alarm unit
an operating manual
a programming unit
a neckband for the alarm unit
3.3
Connecting the base station
Position the base station within reach of the telephone line socket and a power outlet. Only use the components
supplied.
1. Insert the small plug on the power adapter plug cable in the corresponding socket on the rear side of the
base station.
Note:
The plug cannot be connected incorrectly because the plug and socket are designed in such a way to
prevent reverse poling. The plugs must snap audibly into the base station sockets.
2. Insert the small plug on the telephone connection cable in the corresponding socket on the underside of
the base station.
3. Plug the power adapter plug in a properly installed 230 Volt power outlet. The power adapter plug from the
base station must remain connected at all times.
4. Connect the telephone connection cable supplied in telephone socket F.
