Mediant 9000 SBC
Hardware Installation Manual
46
Document #: LTRT-41659
A.2
Viewing Available Snapshots
Currently available system snapshots can be viewed by using the
show-system-
snapshots
command. The ‘default’ snapshot is indicated by asterisk.
Mediant SW(startup-n-recovery)#
show-system-snapshots
first-install-2010-01-01_03-18-29
pre-production-6.70.037.010-2010-01-08_00-39-58
*production-6.70.037.010-2010-01-08_00-41-30
A.3
Changing the Default Snapshot
The ‘default’ snapshot indicates a restore point that is used by Automatic Recovery in the
case of software malfunction (see Section
A.6
) and/or Manual Recovery (see Section
A.5
).
The last user-created snapshot is automatically set as ‘default’ though it can be changed
using the
set-default-snapshot
command.
Mediant SW(startup-n-recovery)#
set-default-snapshot pre-
production-6.70.037.010-2010-01-08_00-40-27
A.4
Deleting a Snapshot
To delete a snapshot, use the
delete-system-snapshot
command:
Mediant SW(startup-n-recovery)#
delete-system-snapshot
pre-
production-6.70.037.010-2010-01-08_00-39-58
A.5
Manual Recovery
Manual recovery is performed on user request. When the Mediant 9000 SBC reboots, a
GRUB menu is displayed that allows users to select one of the following rescue options:
Return to default snapshot
Fix current installation
Browse available system snapshots
Return to factory snapshot (after install from CD)
