AudioCodes 300HD Series, Administrator'S Manual

Page: 81 / 110

Administrator's Manual 4. Configuration File-based Management
Version 1.4 81 July 2010
4.2.5.5.4 SIP QoS Parameters
Table 4-20: SIP QoS Configuration File Parameters
Parameter Description
voip/signalling/sip/tos QoS in hexadecimal format. This is a part of the IP header that defines the
type of routing service to tag outgoing signalling packets originated from the
phone. It informs routers that this packet must receive a specific QoS.
The default value is 0x60.
Values can be set in decimal (e.g. 96) or hexadecimal (e.g. 0x60).
4.2.5.6 Dialing Parameters
Table 4-21: Dialing Configuration File Parameters
Parameter Description
voip/dialing/timeout
The duration (in seconds) of allowed inactivity between dialed digits. When
you work with a proxy, the number you have dialed before the dialing process
has timed out is sent to the proxy as the user ID to be called. This is useful for
calling a remote party without creating a speed dial entry (assuming the
remote party is registered with the proxy).
The valid range is 0 to 10. The default value is 5.
voip/dialing/phone_num
ber_max_size The maximum length of shortcut numbers that you can enter and the
maximum number of digits that you can dial
The valid range is 0 to 32. The default value is 19.
voip/dialing/dial_comple
te_key/enabled Enables the feature for defining a key to indicate that dialing has completed.
Pressing the Dialing Complete key (defined below) forces the phone to make
a call to the dialled digits even if there is no match in the dial plan or digit map.
ƒ
[0] Disable
ƒ
[1] Enable (default)
Note : This parameter is available only if the parameter
voip/dialing/dial_complete_key/enabled is set to 1.
voip/dialing/dial_comple
te_key/key
Defines the Dialing Complete key.
The valid value is a single character. The default value is the pound (#) key.
voip/dialing/dialtone_tim
eout The maximum duration of the dial tone (in seconds) after which the dial tone
stops and a reorder tone is played.
The valid range is 0 to 300. The default value is 30.
voip/dialing/warning_ton
e_timeout The maximum duration of the reorder tone (in seconds) after which the
reorder tone stops and a howler tone is played.
The valid range is 0 to 300. The default value is 40.
voip/dialing/unanswered
_call_timeout Timeout before the phone automatically sends a Cancel message. When the
phone makes a call and the other side doesn’t answer, the phone sends a
Cancel after this timeout
The valid range is 0 to 300. The default value is 60.